- What is a Torx socket used for?
- Are universal sockets any good?
- Can I use impact sockets for everything?
- What is the best quality socket set?
- Can I use a 6 point socket on a 12 point nut?
- Why is the 12 point box wrench more common than the 6 point?
- Are Harbor Freight sockets any good?
- Why are impact sockets black?
- Will metric sockets fit SAE?
- Are 12 point sockets bad?
- Will a 12 point socket work on a Torx bolt?
- What are 8 point sockets for?
- What is the advantage of a 12 point socket?
- What can I use instead of Torx?
- Are Snap On Tools Made in USA?
- Can you strip 12 point sockets?
- What are the 3 ratchet sizes?
- Who invented the ratchet?
What is a Torx socket used for?
Torx Drive A key advantage of the Torx system is that is allows higher torque transmission than other drive systems enabling fastenings to be tighter and therefore more secure.
The straight sides of the Torx six sided star shaped socket helps prevent camout and require lower end-load than cruciform systems..
Are universal sockets any good?
The moving parts in universal sockets will wear faster than a normal socket, but even worse, they get easily gunked up with oil or grease which often renders universal sockets completely useless until they are thoroughly cleaned.
Can I use impact sockets for everything?
If it’s there then you can use impact sockets for everything. Without enough room they become useless. Impact sockets do wear out faster because they are softer, but that probably doesn’t matter.
What is the best quality socket set?
Here are the best socket sets you can buy.Best Overall: Sunex Tools 3342 3/8-Inch Drive Master Impact Socket Set. … Best Budget: Stanley 92-804 30 Piece Socket Set. … Best Torx Bit: Neiko 10083A Master Torx Bit Socket and External Torx Socket Set. … Best Portable: Stalwart 75-HT4023B Ratchet, Metric Socket and Bit Set.More items…
Can I use a 6 point socket on a 12 point nut?
Sockets are commonly made in both 6-point and 12-point styles. For the best fit, choose a 6-point socket for a 6-point fastener and a 12-point socket for a 12-point fastener. Tekton offers sockets in both varieties.
Why is the 12 point box wrench more common than the 6 point?
1) Where the head is already damaged, a 12 is more likely to fit. In comparison a 6-point bolt head only needs to be ‘splashed’ a bit before a 6 point tool won’t fit on it. 2) When working in cramped space, a 12 pointer requires less rotation to get ‘on’ to the bolt.
Are Harbor Freight sockets any good?
Both are good, you won’t be disappointed at all. Re: How are the Harbor Freight sockets? Generally, 1/4 socket’s don’t get impacted by most home users and the bolts you turn with 1/4 sockets aren’t torqued more than 25 ft/lbs.
Why are impact sockets black?
Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.
Will metric sockets fit SAE?
Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
Are 12 point sockets bad?
A 12 point socket on a 6 point fastener is significantly more prone to fail. … There are a few 12 point fasteners in use but they are very rare and when it’s necessary to use a breaker bar in a confined area the 12 point can be necessary. A DIYer would rarely need them though.
Will a 12 point socket work on a Torx bolt?
Neither a 6 or a 12 point socket will help when an E-Torx is required.
What are 8 point sockets for?
An 8 point socket set is essential to.me, sometimes for pipe plugs that have been around too long, and sometimes working on old machinery where I may find square bolts, lags or nuts. … 8 Point sockets work great for removing square bolts and plugs.
What is the advantage of a 12 point socket?
The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.
What can I use instead of Torx?
The right size Allen wrench. But it can be tricky to match up. If you don’t get it exact, you risk stripping out the head. You can buy a set of Torx drivers for about $20.
Are Snap On Tools Made in USA?
Only certain Snap-On tools are still made in the USA. Most hand tools are still made in their facilities in Milwaukee and other U.S. manufacturing locations, but products like their cordless power drill kit are made in China, among other countries. More details below.
Can you strip 12 point sockets?
Do most of you all have sets of both 6 and 12 point tools, or rely on just one kind? As long as you are capable of holding the socket on the nut or bolt head, a 12pt socket will not strip the nut or bolt head any faster then a 6pt socket.
What are the 3 ratchet sizes?
Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs. Most ratchets use a geared drive.
Who invented the ratchet?
Robert Owen, Jr.Robert Owen, Jr., 1881 – 1956, formerly of Shawnee, invented the ratchet wrench. He patented it September 9, 1913. U. S. Patent number 1, 072,980.